FF-43
FLANGE FACING MACHINE
Dimensjoner
-
Lengde(mm):
1050
-
Bredde(mm):
640
-
Høyde(mm):
810
-
Vekt (kg):
300
-
Utstyrsvekt - (kg):
105
-
Løfting/ Transport:
Transport in costumed storage/shipping box
Type
-
Produsent:
Silk
-
Modell:
AX-1445
-
Serienr.:
15041
-
Montering (innvendig/utvendig):
Internal (ID)
-
Min. gripe område rør (Ø mm):
355
-
Maks gripe område rør (Ø mm):
965
-
Min. maskinering diameter (mm):
355
-
Maks. maskinering diameter (mm):
1143
-
Flensetype:
FF
Hub
RF
RTJ
-
Verktøy mating (mm):
40
Tilkoblinger
-
Luft-tilførsel (P@Q):
2,69 m3/m (95 scfm) @ 90 PSI (6,2 bar) Air Motor : 2,61 kW (3,5 Hp)
Annen informasjon
-
Utstyr / Funksjoner:
An externally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring.
Can NOT be used on compact flanges.
Features
- Precise and robust
- Compact and portable
- Internally mounted
- Operates in any orientation
- Cuts “O” Ring grooves, RTJ and other V grooves, standard and compact flange facings, weld reparations, etc.
- Achieves surface finishes from 6.3mm Ra to 1.6mm Ra (250min Ra to 63min Ra) when turning and from 1.6mm Ra to 0.8mm Ra (63min Ra to 32min) when polishing
- Pneumatic drive permits use in hazardous areas