• Varetype:
    VISCOTAQ Viscopaste HT
  • Varenummer:
  • Egenskaper:
    VISCOPASTE is a non crystalline a-polar viscous elastic solid polyolefin coating in paste form used for the protection of under- and aboveground pipeline related substrates against corrosion such as flanges, bolts, valves and for sealing casing ends against water infiltration. VISCOPASTE is a 2-layer system that is commonly used in conjunction with VISCOWRAP and a mechanical protective outer wrap that can be a PE, PVC or PU composite outer wrap.
  • Leveringsenhet:
    Roll 30mm x 37mm x 3mtr

Teknisk informasjon

  • Funksjon:
    - Corrosion preventing - Sealing
  • Produkt informasjon:
    VISCOTAQ is a unique viscous-elastic non crystalline a-polar polyolefin for the protection of shaped and non-shaped substrates.
  • Applikasjon:

    - Temperature range -42° C/-43° F up to +71° C/+160° F

    - Continuous operating temperature up to +85° C/+185° F

    - Application temperature > +5° C/+41° F

    - Surface preparation minimum SSPC/SP-2

    - Recommended surface preparation SA 2-1/2 or SSPC/SP-10

    - Application minimum +3° C/+5° F above dew point

  • Beskyttelse informasjon:
    VISCOTAQ offers the pipeline industry an unrivaled technology when it comes to corrosion prevention. Unlike other coatings VISCOTAQ always has a permanent and intimate contact with the surface of a substrate. The viscosity and elasticity modulus of the material are designed in such a way that the viscosity modulus provides permanent wetting characteristics hence forcing the material to flow into the pores and anomalies of the substrates whereas the elasticity modules provides the strength and elasticity of a solid.

Annen informasjon

  • Fordeler:

    - Melting point +152,8° C/+307,04° F

    - Glass transition temperature -42° C/-43° F

    - Self healing in case of small damages

    - Impervious to moisture and gases

    - Adhesion to the substrate without primer

    - Remaining flexibility over decades

    - Easy in use; can be cut and paste

    - Permanent wetting characteristics

    - Eliminates Microbiological Induced Corrosion (MIC)

    - No curing time

    - Extreme high chemical resistance

    - No sensitivity to salts and osmosis

    - Cohesive fracture

    - 100% inert formulation: no reactive groups and no deterioration in the course of time