350-M-00019PL
Zerust Axxanol 750 VCI Oil
Zerust Axxanol 750 VCI Oil
Do more with time and resources with one product, Zerust® Axxanol™ 750 VCI Oil. It provides comprehensive protection by combining a moisture barrier and contact inhibitor film coating with Zerust® VCI chemistry that migrates to protect voids and crevices. Axxanol™ 750 is designed to be applied by spray, mist or fog and protects steel, cast iron, aluminum, brass and copper for years in applications using packaging.
Axxanol™ 750 leaves a clear, thin, oily film that can be removed with an alkaline cleaner. To protect voids, apply to reachable surfaces by spray, mist or fog and then tightly seal in an enclosure. The VCI protective molecules will saturate and protect within the enclosure. Axxanol™ 750 remains sprayable at sub-zero temperatures of -10°F (-23°C). Please contact your
Zerust® representative for more information on how to use Axxanol™ 750
VCI Oil.
- Apply via spray, mist, or fogging
- Application temperature: -10 to 122°F (-23 to 50°C)
- Coverage (immersion): 1600 ft2, (149 m2) per gal
- Usage (spray): 600 ft2 (55.8 m2) per gal
- Layer thickness: Approx. 1 mil (25 µm)
- Removability: Alkaline cleaner
- VOC content EPA Method 24: 2.14 Lbs/gal (257 g/L)
- Flash Point ASTM D93B: 176°F (80°C)
- Dynamic Viscosity: 30-60cPs @73°F #61, 100RPM
- Indoors: For VCI, use in packaging. For Axxanol™ 750 protection without VCI see Axxanol™ 750-NV
- Indoors (w/ VCI Packaging): For years
- Outdoor: Not recommended
- Closed System: Up to 3 years
- Humidity ASTM D1748: Meets or exceeds 600 hrs
- Salt Spray ASTM B117: Minimum 40 hrs
- Metal types: Multimetal protection
- Storage
- Shipping
- During Operation
- May be used with Zerust® packaging
- All in one VCI, contact inhibitor, and barrier protection
- Sprayable and easy to remove
- Protects in hard-to-reach voids and chambers
- Multimetal protection
- Non-hazardous