Til innhold
NORSK
SØK
Tilbake til konsernsiden
0
Forespørsel

Dimensjoner

  • Lengde(mm):
    460
  • Bredde(mm):
    250
  • Høyde(mm):
    250
  • Vekt (kg):
    15
  • Løfting/ Transport:
    Tool Box, transport on pallet

Byggeår

  • Byggeår:
    2010

Bruksområde / Sertifisering

  • Onshore/offshore:
    Offshore

Type

  • Produsent:
    Curtiss Wright
  • Modell:
    G-250

Flow / Trykk / Volum

  • Bruksområde - Minimum (Ø mm):
    7.1
  • Bruksområde - Maks anbefalt (Ø mm):
    36.8

Innhold

  • Innhold:

    1 ea. Air Injection Test Gun

    1 ea. Plugging Test Gun

    1 ea. Regulator P max 125 PSI

    1 ea. Support Tube assy. 7,1mm – 12,3mm ID

    2 ea. Support Tube assy. 12,4mm – 21,2mm ID

    2 ea. Support Tube assy. 21,3mm – 31,2mm ID

    1 ea. X-OVER Hansen –Offshore claw

Tilkoblinger

  • Luft-tilførsel (P@Q):
    3-8 bar

Annen informasjon

  • Utstyr / Funksjoner:

    Test individual tubes for pinhole leaks using air pressure.

    G-250 Vacuum Tube Testing Guns are designed to quickly seal off and evacuate individual heat exchanger tubes to test the tube for leakage. Operation is easy. Connect standard plant air supply to the active vacuum gun and insert the conical seal into the end of the tube to be tested. Insert the passive plugging tool into the opposite end of the tube. Depress the air control valve, air flows through the vacuum generator and evacuates the tube. Release the air control valve and any loss of vacuum indicated on the vacuum gauge identifies a leaking tube. An optional digital vacuum gauge increases the operators ability to detect even the smallest pinhole leaks.