FF-57
FLANGE FACING MACHINE
Dimensjoner
-
Lengde(mm):
635
-
Bredde(mm):
635
-
Høyde(mm):
457
-
Vekt (kg):
80
-
Utstyrsvekt - (kg):
27
-
Løfting/ Transport:
Transport in costumed storage/shipping box
Type
-
Produsent:
Climax
-
Modell:
FF 5000
-
Serienr.:
12686
-
Montering (innvendig/utvendig):
Internal (ID)
-
Min. gripe område rør (Ø mm):
89
-
Maks gripe område rør (Ø mm):
457
-
Min. maskinering diameter (mm):
127
-
Maks. maskinering diameter (mm):
609
-
Flensetype:
FF
Hub
RF
RTJ
-
Verktøy mating (mm):
50
Tilkoblinger
-
Luft-tilførsel (P@Q):
1,7 m3/m @ 90 PSI (6,2 bar) Air Motor : 0,89 kW (1,2 Hp)
Annen informasjon
-
Utstyr / Funksjoner:
An intenally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring.
Can NOT be used on compact flanges.
The FF5000 is a versatile flange facing machine that allows you to face, bevel, and turn pipe, valve, and pump flanges with ease. The two-piece mounting system makes setup and alignment of this machine quick and easy. It allows one operator to easily set up the machine and begin machining in just a few minutes.
Quick and Easy Setup & Removal
- Separate mounting chuck.
- All centering and leveling is done on the chuck.
- Loosen one bolt and machine can be removed from the chuck without disturbing alignment or calibration.
Feed:
Power Radial & Vertical Feed: Automatic, adjustable and reversible
Automatic Radial Tool Feed: 0 - 0.03 inch/rev. in eight increments 0 - 0.76 mm/rev, in eight increments
Automatic Vertical Tool Feed: 0 - 0.02 inch in eight increments 0 - 0.51 mm in eight increments