Dimensjoner

  • Lengde(mm):
    635
  • Bredde(mm):
    635
  • Høyde(mm):
    457
  • Vekt (kg):
    80
  • Utstyrsvekt - (kg):
    27
  • Løfting/ Transport:
    Transport in costumed storage/shipping box

Type

  • Beskrivelse:
    Flange facing machine
  • Produsent:
    Climax
  • Modell:
    FF 5000
  • Serienr.:
    12684
  • Montering (innvendig/utvendig):

    Internal (ID)

  • Min. gripe område rør (Ø mm):
    89
  • Maks gripe område rør (Ø mm):
    457
  • Min. maskinering diameter (mm):
    127
  • Maks. maskinering diameter (mm):
    609
  • Flensetype:

    FF

    Hub

    RF

    RTJ

  • Verktøy mating (mm):
    50

Tilkoblinger

  • Luft-tilførsel (P@Q):
    1,7 m3/m @ 90 PSI (6,2 bar) Air Motor : 0,89 kW (1,2 Hp)

Annen informasjon

  • Utstyr / Funksjoner:

    An intenally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring.

    Can NOT be used on compact flanges.

    The FF5000 is a versatile flange facing machine that allows you to face, bevel, and turn pipe, valve, and pump flanges with ease. The two-piece mounting system makes setup and alignment of this machine quick and easy. It allows one operator to easily set up the machine and begin machining in just a few minutes.

    Quick and Easy Setup & Removal

    - Separate mounting chuck.

    - All centering and leveling is done on the chuck.

    - Loosen one bolt and machine can be removed from the chuck without disturbing alignment or calibration.

    Feed:

    Power Radial & Vertical Feed: Automatic, adjustable and reversible

    Automatic Radial Tool Feed: 0 - 0.03 inch/rev. in eight increments 0 - 0.76 mm/rev, in eight increments

    Automatic Vertical Tool Feed: 0 - 0.02 inch in eight increments 0 - 0.51 mm in eight increments